FAQ

Transceiver - How does Transceiver perform signal processing: in software or hardware?
Transceiver uses a Software-Defined Radio (SDR) platform as a hardware platform and graphical user interface (GUI). However, the signal processing is perform...
Fri, 23 Feb, 2018 at 11:01 AM
My Riscure device doesn't work
If your device is not working as you expect, please follow the attached flowcharts. If this doesn't fix the problem or if you get stuck somehow, always...
Mon, 5 Mar, 2018 at 11:03 AM
Where can I download the new Inspector version?
Whenever a new version of Inspector is released, it can be downloaded from the Flexera portal or by going to download.riscure.com (redirect). The login cre...
Tue, 15 Jan, 2019 at 12:35 PM
The Inspector TRS format
Many customers ask us about exporting a trace from Inspector (TRS format) to something else, such that they can use it in another program. Although this is ...
Thu, 21 Feb, 2019 at 8:16 AM
HOWTO: Reduce Acquisition/Perturbation run time
In general, the time 1 test takes is mostly (one of) four factors: 1) Acquisition time. Reduction could be achieved based on what your goal is: Acquisitio...
Fri, 12 Apr, 2019 at 9:36 AM
Supported Oscilloscopes
Official This article lists all oscilloscopes that are officially supported by Inspector (Inspector version in parentheses). Note that at time of publishin...
Mon, 9 Aug, 2021 at 11:46 AM
HOWTO: Manually prepare traces for TVLA testing
Background In some cases, it is not possible to use the TVLA data generators provided in Inspector. For instance if you have pre-existing traces that you w...
Thu, 9 Apr, 2020 at 9:31 AM
icWaves shows "Onbekend bevel: 000000FF Riscure"
This error message indicates that the FTDI driver on your system is sending unrecognized commands to the icWaves. This is most commonly caused by a mismatch...
Mon, 4 May, 2020 at 11:32 AM